Some Basic Concepts of Chemistry NEET CBT Mock Test

Chemistry · Chapter test · 25 questions
Some Basic Concepts of Chemistry NEET CBT Mock Test

25 questions in 25 minutes on the NTA computer-based test interface, all from Some Basic Concepts of Chemistry. +4 / -1 marking, instant score, full solutions. Sample questions below are free to read.

A chapter test is the fastest honest check on whether a chapter has actually landed. This one draws 25 questions from Some Basic Concepts of Chemistry, of which 12 are real NEET previous-year questions and 6 sit at the harder end of the bank. Sit it in one 25-minute block, the way you would in the hall.

Revising first? Read the Some Basic Concepts of Chemistry chapter notes, then come back and take this test to check it stuck.

NEET goes computer-based from 2027. Until NTA releases the 2027 bulletin, this mock follows the 2025-26 pattern: 180 questions, +4 / -1.

NEET 2027 Prediction Test Series

Sign in to start this test

One tap with Google, then the test opens here.

Loading your test…

Fetching the question paper. This takes a moment on a slow connection.

NEET 2027 Prediction Test Series

This paper is in the full series

Unlock all 102 timed papers with one payment. Mock tests 1 to 3 stay free.

₹1,799one time, no subscription
  • 29 full NEET mocks180 Q each
  • 45 subject-wise papers45 or 90 Q
  • 30 chapter tests25 Q each
Try a free mock first
Mock CBT Test · NEET 2027NEET 2027 CBT Mock Test
GENERAL INSTRUCTIONS

Duration: 180 minutes · 180 questions · 720 marks maximum

  1. The clock will be set at the server. The countdown timer at the top right of the screen will display the remaining time. When the timer reaches zero, the examination will end by itself.
  2. The Question Palette displayed on the right side of the screen will show the status of each question using one of the following symbols:
You have not visited the question yet. You have not answered the question. You have answered the question. You have NOT answered, but marked for review. Answered & Marked for Review (will be considered for evaluation).
  1. Each correct answer carries +4 marks; each incorrect answer carries −1 mark. Un-attempted questions carry no marks.
  2. Navigate between sections using the section tabs, and between questions using SAVE & NEXT or the Question Palette.
  3. Your answers are saved in this browser, so an accidental refresh will not wipe a test in progress.
Mock CBT Test · NEET 2027NEET 2027 CBT Mock
InstructionsQuestion Paper Time Left : 180:00
Question No. 1
(+4, −1)

Submit the test?

Once you submit you cannot change answers. You will see your score and full solutions.

Your Result

0/ 720 marks
0Correct
0Wrong
0Skipped
0%Accuracy

Practice another mock test →  ·  Continue practising on the ChapterNotes app →

Solutions & Revision

Unlock this test and 101 more

Full-length, subject-wise and chapter CBT papers, one payment.

₹1,799

One payment. No subscription.

See the full library

More Chemistry chapter tests

All NEET Chemistry CBT tests · The full NEET 2027 CBT mock library

NEET CBT mock test: common questions

How many questions are in this Some Basic Concepts of Chemistry mock test?

25 questions in 25 minutes, marked +4 for a correct answer and -1 for a wrong one, exactly like the real paper. 12 of them are NEET previous-year questions.

Is this the same interface as the real NEET CBT?

Yes. On-screen countdown, colour-coded question palette, Save & Next, Clear Response and Mark for Review, then an instant score with full solutions.

Should I take this before or after revising Some Basic Concepts of Chemistry?

Both, and that is the point. Take it cold to find out what you actually do not know, revise from the chapter notes, then retake it to confirm the gap closed.

5 sample questions with solutions

Straight out of this paper, with the worked answer for each. The full test is 25 questions in 25 minutes on the CBT interface above.

  1. Sample Q1
    The number of significant figures for the three numbers 161 cm, 0.161 cm and 0.0161 cm are respectively:
    1. 3, 4 and 4
    2. 3, 3 and 4
    3. 3, 4 and 5
    4. 3, 3 and 3

    Answer: (D) 3, 3 and 3

    All non-zero digits are significant, and leading zeros (to the left of the first non-zero digit) are NOT significant. 161 has 3 s.f.; in 0.161 the leading 0 does not count, giving 3 s.f.; in 0.0161 the two leading zeros do not count, giving 3 s.f. So all three have 3 significant figures.

  2. Sample Q2
    A temperature of 25 °C expressed in the SI base unit kelvin is:
    1. 248 K
    2. 273 K
    3. 300 K
    4. 298 K

    Answer: (D) 298 K

    K = °C + 273.15 ≈ °C + 273. So 25 °C = 25 + 273 = 298 K.

  3. Sample Q3
    What mass of 95% pure CaCO₃ will be required to neutralise 50 mL of 0.5 M HCl solution according to the following reaction? CaCO₃(s) + 2HCl(aq) arrow CaCl₂(aq) + CO₂(g) + H₂O(l) [Calculate upto second place of decimal point]
    1. 1.32 g
    2. 9.50 g
    3. 3.65 g
    4. 1.25 g

    Answer: (A) 1.32 g

    A. Tests: stoichiometry followed by a purity correction applied in the right direction. Why A: moles of HCl = 0.050 × 0.5 = 0.025 mol. The equation needs 2 HCl per CaCO₃, so pure CaCO₃ required = 0.0125 mol × 100 g mol⁻¹ = 1.25 g. The sample is only 95% CaCO₃, so the mass to weigh out = 1.25/0.95 = 1.32 g. Why not D: 1.25 g is the pure CaCO₃ requirement, correct only if the sample were 100% pure; an impure sample always needs MORE [misconception D: “stopping before the purity correction”]. Why not C: 3.65 g is the molar mass of HCl (36.5) with the decimal shifted; no substitution of 0.025 mol into the 2:1 ratio with 100 g mol⁻¹ gives it. Why not B: 9.50 g merely echoes the 95 of the purity figure; it is 0.095 mol of pure CaCO₃, 7.6 times the 0.0125 mol actually needed. Remember: divide by the purity fraction, never multiply, because impurity means you must weigh out extra.

  4. Sample Q4
    CaCO₃(s) + 2HCl(aq) arrow CaCl₂(aq) + CO₂(g) + H₂O(l). Consider the above reaction, what mass of CaCl₂ will be formed if 250 mL of 0.76 M HCl reacts with 1000 g of CaCO₃? (Given: molar mass of Ca, C, O, H and Cl are 40, 12, 16, 1 and 35.5 g mol⁻¹, respectively)
    1. 10.545 g
    2. 2.636 g
    3. 3.908 g
    4. 5.272 g

    Answer: (A) 10.545 g

    A. Tests: spotting the limiting reagent when one reactant arrives as a solution and the other as a large solid mass. Why A: moles of HCl = 0.250 × 0.76 = 0.19 mol. Moles of CaCO₃ = 1000/100 = 10 mol, so HCl is limiting by a wide margin. The equation needs 2 HCl per CaCl₂, so CaCl₂ = 0.19/2 = 0.095 mol. Molar mass of CaCl₂ = 40 + 2(35.5) = 111 g mol⁻¹, so mass = 0.095 × 111 = 10.545 g. Why not C: 3.908 g is 0.0352 mol of CaCl₂; no consistent substitution of the 0.19 mol of HCl into the 2:1 ratio produces that number. Why not B: 2.636 g is 0.0238 mol, one quarter of the correct 0.095 mol, and nothing in the stoichiometry divides the HCl by eight. Why not D: 5.272 g is exactly half the answer, from applying the divide-by-2 of the 2:1 ratio a second time [misconception D: “halving twice because the coefficient is 2”]. Remember: 1000 g of a solid can still be the excess reagent; convert BOTH reactants to moles before deciding which one limits.

  5. Sample Q5
    A mixture of 2.3 g formic acid and 4.5 g oxalic acid is treated with conc. H₂SO₄. The evolved gaseous mixture is passed through KOH pellets. Weight (in g) of the remaining product at STP will be
    1. 1.4
    2. 3.0
    3. 2.8
    4. 4.4

    Answer: (C) 2.8

    C. Tests: combining dehydration products of two acids with selective absorption of an acidic gas. Why C: Formic acid HCOOH has molar mass 46, so 2.3/46 = 0.05 mol, and conc. H₂SO₄ dehydrates it to CO + H₂O, giving 0.05 mol CO. Oxalic acid H₂C₂O₄ has molar mass 90, so 4.5/90 = 0.05 mol, and it dehydrates to CO + CO₂ + H₂O, giving another 0.05 mol CO plus 0.05 mol CO₂. KOH pellets are basic and absorb only the acidic CO₂; CO is neutral and passes through. Remaining gas = 0.05 + 0.05 = 0.1 mol CO, mass = 0.1 x 28 = 2.8 g. Why not A: 1.4 g is 0.05 mol of CO, the CO from only one of the two acids; both acids release CO. Why not B: 3.0 g of CO would be 3.0/28 = 0.107 mol, which no combination of the two 0.05 mol batches produces; no consistent substitution gives this value. Why not D: 4.4 g is 0.1 mol of CO₂, which is what you get by assuming both acids give only CO₂ and that KOH removes the CO [misconception D: “KOH absorbs whatever gas is left”]; KOH absorbs CO₂, not CO. Remember: conc. H₂SO₄ takes water out, formic acid leaves CO while oxalic acid leaves CO + CO₂, and KOH keeps only the CO₂.

Scroll to Top