Ray Optics and Optical Instruments NEET CBT Mock Test

Physics · Chapter test · 25 questions
Ray Optics and Optical Instruments NEET CBT Mock Test

25 questions in 25 minutes on the NTA computer-based test interface, all from Ray Optics and Optical Instruments. +4 / -1 marking, instant score, full solutions. Sample questions below are free to read.

A chapter test is the fastest honest check on whether a chapter has actually landed. This one draws 25 questions from Ray Optics and Optical Instruments, of which 18 are real NEET previous-year questions and 6 sit at the harder end of the bank. Sit it in one 25-minute block, the way you would in the hall.

Revising first? Read the Ray Optics and Optical Instruments chapter notes, then come back and take this test to check it stuck.

NEET goes computer-based from 2027. Until NTA releases the 2027 bulletin, this mock follows the 2025-26 pattern: 180 questions, +4 / -1.

NEET 2027 Prediction Test Series

Sign in to start this test

One tap with Google, then the test opens here.

Loading your test…

Fetching the question paper. This takes a moment on a slow connection.

NEET 2027 Prediction Test Series

This paper is in the full series

Unlock all 102 timed papers with one payment. Mock tests 1 to 3 stay free.

₹1,799one time, no subscription
  • 29 full NEET mocks180 Q each
  • 45 subject-wise papers45 or 90 Q
  • 30 chapter tests25 Q each
Try a free mock first
Mock CBT Test · NEET 2027NEET 2027 CBT Mock Test
GENERAL INSTRUCTIONS

Duration: 180 minutes · 180 questions · 720 marks maximum

  1. The clock will be set at the server. The countdown timer at the top right of the screen will display the remaining time. When the timer reaches zero, the examination will end by itself.
  2. The Question Palette displayed on the right side of the screen will show the status of each question using one of the following symbols:
You have not visited the question yet. You have not answered the question. You have answered the question. You have NOT answered, but marked for review. Answered & Marked for Review (will be considered for evaluation).
  1. Each correct answer carries +4 marks; each incorrect answer carries −1 mark. Un-attempted questions carry no marks.
  2. Navigate between sections using the section tabs, and between questions using SAVE & NEXT or the Question Palette.
  3. Your answers are saved in this browser, so an accidental refresh will not wipe a test in progress.
Mock CBT Test · NEET 2027NEET 2027 CBT Mock
InstructionsQuestion Paper Time Left : 180:00
Question No. 1
(+4, −1)

Submit the test?

Once you submit you cannot change answers. You will see your score and full solutions.

Your Result

0/ 720 marks
0Correct
0Wrong
0Skipped
0%Accuracy

Practice another mock test →  ·  Continue practising on the ChapterNotes app →

Solutions & Revision

Unlock this test and 101 more

Full-length, subject-wise and chapter CBT papers, one payment.

₹1,799

One payment. No subscription.

See the full library

More Physics chapter tests

All NEET Physics CBT tests · The full NEET 2027 CBT mock library

NEET CBT mock test: common questions

How many questions are in this Ray Optics and Optical Instruments mock test?

25 questions in 25 minutes, marked +4 for a correct answer and -1 for a wrong one, exactly like the real paper. 18 of them are NEET previous-year questions.

Is this the same interface as the real NEET CBT?

Yes. On-screen countdown, colour-coded question palette, Save & Next, Clear Response and Mark for Review, then an instant score with full solutions.

Should I take this before or after revising Ray Optics and Optical Instruments?

Both, and that is the point. Take it cold to find out what you actually do not know, revise from the chapter notes, then retake it to confirm the gap closed.

5 sample questions with solutions

Straight out of this paper, with the worked answer for each. The full test is 25 questions in 25 minutes on the CBT interface above.

  1. Sample Q1
    A lens of large focal length and large aperture is best suited as an objective of an astronomical telescope since:
    1. a large aperture provides a better resolution.
    2. All the above.
    3. a large area of the objective ensures better light gathering power.
    4. a large aperture contributes to the quality and visibility of the images.

    Answer: (B) All the above.

    B. Tests: why telescope objectives are built with large aperture and large focal length. Why B: A large aperture gathers more light (area scales as the square of the diameter), so faint stars appear brighter; it also reduces the diffraction limit θ≈(1.22λ)/(D), giving better resolution; together these improve image quality and visibility. Since A, B and C are all true benefits, the best answer is all of the above. The large focal length separately boosts magnification m=(fₒ)/(fₑ). Why not D: true but incomplete, image quality is only one consequence of a big aperture [misconception D: “the first true statement must be the answer”] Why not C: true but incomplete, light gathering is only part of the story [misconception C: “aperture only affects brightness”] Why not A: true but incomplete, resolution is only part of the story [misconception A: “aperture only affects resolution”] Remember: big objective aperture = brighter AND sharper; big objective focal length = more magnification.

  2. Sample Q2
    An air bubble in a glass slab (refractive index 1.5, near-normal incidence) is 5 cm deep when viewed from one surface and 3 cm deep when viewed from the opposite face. The thickness (in cm) of the slab is:
    1. 12
    2. 8
    3. 16
    4. 10

    Answer: (A) 12

    For the two faces: (x)/(μ)+(t-x)/(μ)=3+5, i.e. (t)/(μ)=8. So t=8μ=8×1.5=12 cm.

  3. Sample Q3
    An object is mounted on a wall. Its image of equal size is to be obtained on a parallel wall with the help of a convex lens placed between these walls. The lens is kept at distance x in front of the second wall. The required focal length of the lens will be:
    1. (x)/(2)
    2. less than (x)/(4)
    3. (x)/(4)
    4. more than (x)/(4) but less than (x)/(2)

    Answer: (A) (x)/(2)

    A. Tests: the equal-size real image condition for a convex lens. Why A: An equal-size real image means |m|=1, which happens only when the object is at 2f and the image is at 2f on the other side. The image forms on the second wall, so the lens-to-image distance is x, giving 2f=x, i.e. f=(x)/(2). Why not B: less than (x)/(4) misapplies the displacement-method condition f≤(D)/(4), and even that uses the wall-to-wall separation D, not the lens-to-wall distance x [misconception B: “f = separation/4 governs every two-wall setup”] Why not D: no lens rule places f strictly between (x)/(4) and (x)/(2); it hedges between two half-remembered formulas [misconception D: “averaging remembered results”] Why not C: (x)/(4) again confuses x with the full object-to-image distance 4f [misconception C: “x is the wall-to-wall distance”] Remember: unit magnification puts object and image at 2f each; here the image leg alone is x=2f.

  4. Sample Q4
    A convex lens forms a virtual, erect and magnified image when the object is placed:
    1. between F and 2F
    2. at 2F
    3. between the lens and F
    4. beyond 2F

    Answer: (C) between the lens and F

    When the object is inside the focal length (between lens and F), a convex lens forms a virtual, erect, magnified image – the magnifying glass action.

  5. Sample Q5
    Assertion: The objective of an astronomical telescope has a large aperture. Reason: A large aperture gathers more light and improves resolving power.
    1. Assertion false, reason true
    2. Both assertion and reason are true and reason correctly explains assertion
    3. Assertion true, reason false
    4. Both are true but reason does not explain assertion

    Answer: (B) Both assertion and reason are true and reason correctly explains assertion

    A larger objective aperture collects more light (brighter image) and increases resolving power, so the reason correctly explains the assertion.

Scroll to Top