Electrochemistry NEET CBT Mock Test

Chemistry · Chapter test · 25 questions
Electrochemistry NEET CBT Mock Test

25 questions in 25 minutes on the NTA computer-based test interface, all from Electrochemistry. +4 / -1 marking, instant score, full solutions. Sample questions below are free to read.

A chapter test is the fastest honest check on whether a chapter has actually landed. This one draws 25 questions from Electrochemistry, of which 12 are real NEET previous-year questions and 6 sit at the harder end of the bank. Sit it in one 25-minute block, the way you would in the hall.

Revising first? Read the Electrochemistry chapter notes, then come back and take this test to check it stuck.

NEET goes computer-based from 2027. Until NTA releases the 2027 bulletin, this mock follows the 2025-26 pattern: 180 questions, +4 / -1.

NEET 2027 Prediction Test Series

Sign in to start this test

One tap with Google, then the test opens here.

Loading your test…

Fetching the question paper. This takes a moment on a slow connection.

NEET 2027 Prediction Test Series

This paper is in the full series

Unlock all 102 timed papers with one payment. Mock tests 1 to 3 stay free.

₹1,799one time, no subscription
  • 29 full NEET mocks180 Q each
  • 45 subject-wise papers45 or 90 Q
  • 30 chapter tests25 Q each
Try a free mock first
Mock CBT Test · NEET 2027NEET 2027 CBT Mock Test
GENERAL INSTRUCTIONS

Duration: 180 minutes · 180 questions · 720 marks maximum

  1. The clock will be set at the server. The countdown timer at the top right of the screen will display the remaining time. When the timer reaches zero, the examination will end by itself.
  2. The Question Palette displayed on the right side of the screen will show the status of each question using one of the following symbols:
You have not visited the question yet. You have not answered the question. You have answered the question. You have NOT answered, but marked for review. Answered & Marked for Review (will be considered for evaluation).
  1. Each correct answer carries +4 marks; each incorrect answer carries −1 mark. Un-attempted questions carry no marks.
  2. Navigate between sections using the section tabs, and between questions using SAVE & NEXT or the Question Palette.
  3. Your answers are saved in this browser, so an accidental refresh will not wipe a test in progress.
Mock CBT Test · NEET 2027NEET 2027 CBT Mock
InstructionsQuestion Paper Time Left : 180:00
Question No. 1
(+4, −1)

Submit the test?

Once you submit you cannot change answers. You will see your score and full solutions.

Your Result

0/ 720 marks
0Correct
0Wrong
0Skipped
0%Accuracy

Practice another mock test →  ·  Continue practising on the ChapterNotes app →

Solutions & Revision

Unlock this test and 101 more

Full-length, subject-wise and chapter CBT papers, one payment.

₹1,799

One payment. No subscription.

See the full library

More Chemistry chapter tests

All NEET Chemistry CBT tests · The full NEET 2027 CBT mock library

NEET CBT mock test: common questions

How many questions are in this Electrochemistry mock test?

25 questions in 25 minutes, marked +4 for a correct answer and -1 for a wrong one, exactly like the real paper. 12 of them are NEET previous-year questions.

Is this the same interface as the real NEET CBT?

Yes. On-screen countdown, colour-coded question palette, Save & Next, Clear Response and Mark for Review, then an instant score with full solutions.

Should I take this before or after revising Electrochemistry?

Both, and that is the point. Take it cold to find out what you actually do not know, revise from the chapter notes, then retake it to confirm the gap closed.

5 sample questions with solutions

Straight out of this paper, with the worked answer for each. The full test is 25 questions in 25 minutes on the CBT interface above.

  1. Sample Q1
    For the cell Zn|Zn²⁺(1 M)||Cu²⁺(c)|Cu, the cell EMF will be maximum when [Cu²⁺] is:
    1. Equal to [Zn²⁺]
    2. Very high
    3. Zero
    4. Very low

    Answer: (B) Very high

    Ecell = E°cell − (0.0591/2)log([Zn²⁺]/[Cu²⁺]). Increasing [Cu²⁺] (the reactant) makes the log term more negative, so −(…) raises EMF. Highest [Cu²⁺] gives maximum EMF.

  2. Sample Q2
    Assertion (A): For a Daniell cell Zn/Zn²⁺||Cu²⁺|Cu with E_(cell) = 1.1 V, the application of opposite potential greater than 1.1 V results into the flow of electrons from cathode to anode. Reason (R): Zn is deposited at zinc electrode and Cu is dissolved at copper electrode.
    1. Both (A) and (R) are true and (R) is the correct explanation of (A).
    2. Both (A) and (R) are true, but (R) is not the correct explanation of (A).
    3. (A) is true and (R) is false.
    4. Both (A) and (R) are false.

    Answer: (A) Both (A) and (R) are true and (R) is the correct explanation of (A).

    A. Tests: what happens to a Daniell cell when an opposing external voltage is pushed past its emf. Why A: With Eₑₓₜ > 1.1 V the external source overpowers the cell, so electrons are driven backwards, from the copper electrode (the cathode of the spontaneous cell) towards the zinc electrode, and the assertion is true. Reversing the electron flow reverses both electrode reactions: Zn²⁺ + 2e⁻ arrow Zn now plates zinc onto the zinc electrode, while Cu arrow Cu²⁺ + 2e⁻ dissolves the copper electrode, so the reason is true as well. The reason is not a separate fact, it is the chemical statement of the very reversal the assertion describes, so it explains it. Why not B: the reason is not an unrelated truth, depositing Zn and dissolving Cu is exactly what reversed electron flow means at each electrode [misconception B: “two true statements about the same cell must be independent”]. Why not C: the reason is true, and this reversal is the standard NCERT description of a Daniell cell driven above 1.1 V [misconception C: “electrode reactions cannot be reversed once the cell is built”]. Why not D: both statements are true, the assertion following directly from Eₑₓₜ > E_(cell) [misconception D: “an external voltage can only stop a cell, never reverse it”]. Remember: push a Daniell cell past 1.1 V from outside and it runs backwards, plating Zn and eating Cu.

  3. Sample Q3
    The efficiency of a fuel cell is given by:
    1. ΔG/ΔS
    2. ΔG/ΔH
    3. ΔH/ΔG
    4. ΔS/ΔG

    Answer: (B) ΔG/ΔH

    The thermodynamic efficiency of a fuel cell is the fraction of the fuel’s enthalpy converted to useful electrical (free-energy) work: η = ΔG/ΔH. Fuel cells can approach 100% efficiency.

  4. Sample Q4
    The conductivity of a solution is 0.025 S cm⁻¹ and its molar conductivity is 250 S cm² mol⁻¹. The molar concentration is:
    1. 0.1 mol L⁻¹
    2. 0.001 mol L⁻¹
    3. 1 mol L⁻¹
    4. 0.01 mol L⁻¹

    Answer: (A) 0.1 mol L⁻¹

    Λm = κ×1000/c ⇒ c = κ×1000/Λm = 0.025×1000/250 = 0.1 mol L⁻¹.

  5. Sample Q5
    In a galvanic cell, the anode is the electrode where:
    1. Reduction occurs and it is positive
    2. Oxidation occurs and it is negative
    3. Reduction occurs and it is negative
    4. Oxidation occurs and it is positive

    Answer: (B) Oxidation occurs and it is negative

    In a galvanic cell, oxidation always occurs at the anode, which is the negative terminal (electrons leave it to the external circuit). The cathode is positive and is the reduction site.

Scroll to Top