Chemical Reactions and Equations is the opening chapter of CBSE Class 10 Science. It teaches you to recognise a reaction from its observations, write and balance a chemical equation using the law of conservation of mass, and classify reactions as combination, decomposition, displacement, double displacement, or redox. It closes with corrosion and rancidity, the two everyday effects of oxidation. Balancing coefficients, naming reaction types, and identifying oxidising agents are near-certain marks every year, so this chapter gives a reliable 4 to 7 marks in the board paper.
What You’ll Learn in This Chapter
- How to recognise a chemical reaction from the five NCERT observations
- How to write, balance, and annotate a chemical equation
- The five reaction types CBSE tests, with exact NCERT equations and conditions
- Exothermic and endothermic reactions, oxidising and reducing agents
- Corrosion and rancidity, and how to prevent them
- How the chapter is asked in the board paper, with worked competency questions and the mistakes that cost marks
Key Concepts
1. What is a Chemical Reaction
Cook an egg and the runny, transparent white turns solid and opaque, and nothing brings the raw egg back. The substances have permanently changed into new substances, which is the whole idea of a chemical reaction.
In chemistry terms, a chemical reaction is a process in which one or more substances (the reactants) are converted into one or more new substances (the products). The atoms are the same before and after; they are simply rearranged into new combinations with new properties.
A physical change alters only state or shape. Melting ice and dissolving sugar are physical changes: the substance is still H2O, still sugar.
The three NCERT activities every student should know
Examiners describe an activity and ask what was observed. These three open the chapter and appear in the paper almost every year.
| Activity | What you do | What you observe | Equation |
|---|---|---|---|
| Burning magnesium ribbon | Clean a 2 cm ribbon with sandpaper (to remove the MgO layer), hold it with tongs and burn it over a watch glass | Dazzling white flame; a white powder (magnesium oxide) collects on the watch glass | 2Mg(s) + O2(g) → 2MgO(s) |
| Lead nitrate and potassium iodide | Mix the two colourless solutions in a test tube | A yellow precipitate of lead iodide forms at once | Pb(NO3)2(aq) + 2KI(aq) → PbI2(s) + 2KNO3(aq) |
| Zinc and dilute sulphuric acid | Add dilute H2SO4 to zinc granules in a conical flask | Bubbles of hydrogen gas; the flask becomes warm to the touch | Zn(s) + H2SO4(aq) → ZnSO4(aq) + H2(g) |
How you know a chemical reaction has happened
NCERT lists five observations. A reaction may show one of these or several at once.
- Change in state: wax (solid) burns to give carbon dioxide and water vapour (gases).
- Change in colour: green ferrous sulphate crystals turn brown on heating; a shiny iron nail turns reddish brown when it rusts.
- Evolution of a gas: zinc with dilute acid gives hydrogen bubbles; baking soda with vinegar fizzes with carbon dioxide.
- Change in temperature: quicklime hisses and becomes hot when water is added (exothermic); ammonium chloride dissolving in water makes the test tube cold (endothermic).
- Formation of a precipitate: an insoluble solid appears when two clear solutions are mixed, such as the yellow PbI2 above or white BaSO4.
In short: a chemical reaction makes new substances. Look for change of state, colour, temperature, gas, or precipitate, and be ready to pair each observation with its equation.
2. Chemical Equations: The Shorthand Code
A chemical equation replaces the sentence “magnesium reacts with oxygen to form magnesium oxide” with symbols and formulae.
Word equation: Magnesium + Oxygen → Magnesium oxide
Skeletal equation: Mg + O2 → MgO
Balanced equation: 2Mg + O2 → 2MgO
A skeletal equation uses the correct formulae but is unbalanced: 2 oxygen atoms on the left, 1 on the right. Examiners do ask for this definition.
The arrow (→) is read as “gives” or “produces”. Reactants sit on the left, products on the right. A plus sign between reactants means “reacts with”; between products it means “and”.
Symbols and conditions written in equations
| Symbol | Meaning | Example |
|---|---|---|
| (s) | Solid | Mg(s), MgO(s) |
| (l) | Liquid | H2O(l) |
| (g) | Gas | O2(g), H2(g) |
| (aq) | Aqueous, dissolved in water | CuSO4(aq), NaCl(aq) |
| Heat or Δ above the arrow | Reaction needs heating | CaCO3 (heat) → CaO + CO2 |
| Sunlight above the arrow | Light energy is supplied | 2AgCl (sunlight) → 2Ag + Cl2 |
| Electric current above the arrow | Electrical energy is supplied | 2H2O (electricity) → 2H2 + O2 |
(aq) and (l) are different. Hydrochloric acid is HCl(aq), a gas dissolved in water. Liquid water is H2O(l); steam is H2O(g), which is what the iron and steam reaction uses.
In short: reactants on the left, products on the right, state symbols in brackets, conditions above the arrow.
3. How to Balance a Chemical Equation
The law of conservation of mass states that mass can neither be created nor destroyed in a chemical reaction. In practice this means the number of atoms of each element must be the same before and after the reaction. The total mass of products equals the total mass of reactants.
Balancing an equation means adjusting the coefficients (the numbers written in front of formulae) until every element has equal atoms on both sides. NCERT calls the method hit and trial.
Worked method: iron and steam
Step 1. Write the skeletal equation with correct formulae.
Fe + H2O → Fe3O4 + H2
Step 2. List the atoms of each element on each side.
| Element | Reactant side | Product side |
|---|---|---|
| Fe | 1 | 3 |
| H | 2 | 2 |
| O | 1 | 4 |
Step 3. Start with the compound that has the largest number of atoms, here Fe3O4, and pick the element in it that is most unbalanced. Oxygen is 1 on the left and 4 on the right, so put a 4 in front of H2O.
Fe + 4H2O → Fe3O4 + H2
Step 4. Hydrogen is now 8 on the left and 2 on the right. Put a 4 in front of H2.
Fe + 4H2O → Fe3O4 + 4H2
Step 5. Iron is 1 on the left and 3 on the right. Put a 3 in front of Fe.
3Fe + 4H2O → Fe3O4 + 4H2
Step 6. Recount. Fe: 3 = 3. H: 8 = 8. O: 4 = 4. The equation is balanced.
Step 7. Add state symbols and conditions.
3Fe(s) + 4H2O(g) → Fe3O4(s) + 4H2(g)
Golden rule: change coefficients only. Writing H2O2 to balance oxygen turns water into hydrogen peroxide, a completely different substance, and the examiner will award zero for that step.
A second example: aluminium and water
This exact equation came in the 2025 board paper as a coefficient MCQ.
Skeletal: Al + H2O → Al2O3 + H2
Oxygen: 1 on the left, 3 on the right, so 3H2O. Hydrogen is now 6 on the left, so 3H2. Aluminium is 1 on the left, 2 on the right, so 2Al.
Balanced: 2Al + 3H2O → Al2O3 + 3H2. The coefficients p, q, r, s are 2, 3, 1, 3.
In short: count atoms, adjust coefficients starting with the most unbalanced element, recount, add state symbols. Never alter a subscript.
4. Types of Chemical Reactions
CBSE tests five types. For each, learn the pattern, one NCERT equation with its conditions, and the observation.
a) Combination reaction: two become one
Two or more reactants combine to form a single product.
Pattern: A + B → AB
The NCERT flagship example is quicklime and water. Calcium oxide reacts vigorously with water to give slaked lime (calcium hydroxide) and a large amount of heat; the beaker becomes hot and the mixture hisses.
CaO(s) + H2O(l) → Ca(OH)2(aq) + heat
This is the chemistry of whitewashing. Slaked lime applied to a wall reacts slowly with carbon dioxide in air over two to three days, forming a thin shiny layer of calcium carbonate, the compound marble is made of.
Ca(OH)2(aq) + CO2(g) → CaCO3(s) + H2O(l)
Other NCERT combination reactions: C(s) + O2(g) → CO2(g), 2H2(g) + O2(g) → 2H2O(l), and 2Mg(s) + O2(g) → 2MgO(s). All release heat, so most combination reactions are exothermic.
b) Decomposition reaction: one breaks into many
A single reactant breaks down into two or more simpler products. Decomposition is the opposite of combination, and it needs energy to break the bonds. NCERT names three sources of that energy.
Pattern: AB → A + B
Thermal decomposition (energy as heat)
Ferrous sulphate crystals are green. On heating in a dry boiling tube, they first lose their water of crystallisation, then decompose into brown ferric oxide, with sulphur dioxide and sulphur trioxide escaping. The smell is like burning sulphur. The green crystals turn brown.
2FeSO4(s) (heat) → Fe2O3(s) + SO2(g) + SO3(g)
Limestone decomposes on strong heating into quicklime and carbon dioxide. This reaction is used industrially to manufacture cement and lime.
CaCO3(s) (heat) → CaO(s) + CO2(g)
Lead nitrate, a white solid, gives brown fumes of nitrogen dioxide on heating and leaves yellow lead oxide. This equation is the single most repeated MCQ in the chapter.
2Pb(NO3)2(s) (heat) → 2PbO(s) + 4NO2(g) + O2(g)
Electrolytic decomposition (energy as electricity)
Water is split by an electric current. A few drops of dilute sulphuric acid are added because pure water is a poor conductor. Hydrogen collects at the cathode, oxygen at the anode, and the volume of hydrogen is twice that of oxygen.
2H2O(l) (electric current) → 2H2(g) + O2(g)
A 2025 board MCQ asked for the mass ratio instead of the volume ratio. Hydrogen: 4 g (2 × 2). Oxygen: 32 g. So the mass ratio H : O is 1 : 8 even though the volume ratio is 2 : 1.
Photolytic decomposition (energy as light)
White silver chloride turns grey in sunlight as it breaks down into silver metal and chlorine gas. Silver bromide behaves the same way. This is the basis of black and white photography.
2AgCl(s) (sunlight) → 2Ag(s) + Cl2(g)
2AgBr(s) (sunlight) → 2Ag(s) + Br2(g)
Since decomposition reactions absorb energy, they are generally endothermic. The one NCERT exception to remember: decomposition of vegetable matter into compost releases heat and is exothermic. This pairing was a 2025 assertion-reason question.
c) Displacement reaction: the more reactive element takes the place
A more reactive element displaces a less reactive element from its compound.
Pattern: A + BC → AC + B, where A is more reactive than B
Place an iron nail in blue copper sulphate solution and leave it for 20 minutes. The nail gets a brownish coating of copper, and the blue solution fades to pale green because ferrous sulphate has formed. Iron sits above copper in the reactivity series, so it displaces copper.
Fe(s) + CuSO4(aq) → FeSO4(aq) + Cu(s)
Also from NCERT: Zn(s) + CuSO4(aq) → ZnSO4(aq) + Cu(s) and Pb(s) + CuCl2(aq) → PbCl2(aq) + Cu(s).
Metal plus acid reactions are displacement reactions too: the metal displaces hydrogen from the acid. Zn + 2CH3COOH → (CH3COO)2Zn + H2 was a 2024 board MCQ, and the answer was displacement.
The thermite reaction is a dramatic displacement used to weld railway tracks. Aluminium is more reactive than iron, so it pulls oxygen away from iron(III) oxide. The reaction is so exothermic that the iron is produced in molten form.
Fe2O3(s) + 2Al(s) → 2Fe(l) + Al2O3(s) + heat
d) Double displacement reaction: partner swap
Two compounds exchange their ions to form two new compounds.
Pattern: AB + CD → AD + CB
Mix sodium sulphate solution with barium chloride solution and a white solid appears immediately. That solid is barium sulphate, which is insoluble in water. Any reaction that produces an insoluble product is called a precipitation reaction.
Na2SO4(aq) + BaCl2(aq) → BaSO4(s) + 2NaCl(aq)
The lead nitrate and potassium iodide reaction from the start of the chapter is also a double displacement and a precipitation reaction (yellow PbI2).
Neutralisation is a double displacement reaction too. An acid and a base swap partners to give a salt and water.
NaOH(aq) + HCl(aq) → NaCl(aq) + H2O(l)
A 2023 three-mark question asked for a double displacement reaction that is also a neutralisation and one that is also a precipitation. The two equations above are the model answer.
e) Exothermic and endothermic reactions
Reactions that release heat are exothermic. Reactions that absorb heat are endothermic. CBSE tests these as a category on their own, usually as an MCQ or a “which of these is endothermic” question.
| Exothermic (heat released) | Endothermic (heat absorbed) |
|---|---|
| Burning of natural gas: CH4(g) + 2O2(g) → CO2(g) + 2H2O(g) + energy | Thermal decomposition of calcium carbonate |
| Respiration: C6H12O6(aq) + 6O2(aq) → 6CO2(aq) + 6H2O(l) + energy | Electrolysis of water |
| Quicklime with water | Decomposition of silver chloride in sunlight |
| Decomposition of vegetable matter into compost | Dissolving ammonium chloride in water (test tube becomes cold) |
f) Oxidation and reduction (redox reactions)
Redox describes what happens to the atoms rather than how many reactants and products there are. A single reaction can be both a combination reaction and a redox reaction.
- Oxidation is the gain of oxygen or the loss of hydrogen by a substance.
- Reduction is the loss of oxygen or the gain of hydrogen by a substance.
Class 10 uses the oxygen and hydrogen definitions. The electron version (OIL RIG: Oxidation Is Loss, Reduction Is Gain of electrons) is a handy memory hook for class 11.
Oxidation and reduction always happen together. When one substance gains oxygen, another must have given it up. That is why these are called redox reactions.
NCERT example: copper and hydrogen. Heat copper powder in a china dish and its surface turns black because copper(II) oxide forms. Pass hydrogen gas over the hot black CuO and it turns brown again as copper metal is regenerated.
2Cu(s) + O2(g) (heat) → 2CuO(s)
CuO(s) + H2(g) (heat) → Cu(s) + H2O(g)
In the second reaction, CuO loses oxygen and is reduced. H2 gains oxygen and is oxidised.
Oxidising agent: the substance that gives oxygen (or removes hydrogen) to another substance. It is itself reduced. In CuO + H2, CuO is the oxidising agent.
Reducing agent: the substance that removes oxygen (or adds hydrogen) to another substance. It is itself oxidised. In CuO + H2, H2 is the reducing agent.
Two more equations that appear in board papers:
ZnO + C → Zn + CO. ZnO is reduced (loses O), carbon is oxidised (gains O). Carbon is the reducing agent.
MnO2 + 4HCl → MnCl2 + 2H2O + Cl2. MnO2 loses oxygen and is reduced. HCl loses hydrogen (it becomes Cl2) and is oxidised. MnO2 is the oxidising agent.
A 2024 MCQ asked which reaction is redox but not combination. Fe2O3 + 3CO → 2Fe + 3CO2 is the answer: iron oxide is reduced and CO is oxidised, and the reaction has two products, so it is a displacement, not a combination.
In short: combination (A + B → AB), decomposition (AB → A + B), displacement (reactive metal kicks out a less reactive one), double displacement (ions swap), redox (oxygen or hydrogen transferred; the oxidising agent is reduced).
5. Effects of Oxidation in Everyday Life
Corrosion
When a metal is attacked by substances around it, such as moisture, air, or acids, the process is called corrosion. The metal is oxidised slowly on its surface.
- Iron forms a reddish brown flaky coating of rust, hydrated iron(III) oxide, Fe2O3·xH2O. Both air (oxygen) and moisture are needed.
- Silver articles turn black because silver reacts with sulphur compounds in the air to form silver sulphide, Ag2S.
- Copper develops a green coating of basic copper carbonate when exposed to moist air.
Rusting refers only to iron; corrosion is the general term for all metals. Corrosion damages car bodies, bridges, railings, and ships, and repairs cost enormous sums every year. NCERT details the prevention methods in Chapter 3, but the board paper often asks for two here:
- Painting, oiling, or greasing to block air and moisture
- Galvanisation, coating iron with a thin layer of zinc
- Alloying, for example stainless steel (iron with chromium and nickel) resists rust
Rancidity
An old packet of chips smells and tastes stale because the fats and oils in it have been oxidised by air. This change in smell and taste is called rancidity.
Ways to prevent rancidity, as given in NCERT:
- Add antioxidants to foods containing fats and oils (antioxidants are substances that prevent oxidation).
- Store food in airtight containers to slow down oxidation.
- Flush packets with nitrogen. Chip manufacturers fill the bag with nitrogen, an unreactive gas, so oxygen cannot reach the fats.
- Refrigerate. Low temperature slows the oxidation reaction.
In short: corrosion is slow oxidation of a metal surface; rancidity is oxidation of fats and oils in food. Both are prevented by keeping oxygen away.
Read the rest of the chapter →Hide the rest ↑
Important Definitions
| Term | Definition to write in the exam |
|---|---|
| Chemical reaction | A process in which one or more substances are converted into one or more new substances with different properties |
| Reactant | A substance that takes part in a chemical reaction; written on the left of the arrow |
| Product | A new substance formed in a chemical reaction; written on the right of the arrow |
| Chemical equation | A symbolic representation of a chemical reaction using formulae of reactants and products |
| Skeletal chemical equation | An unbalanced equation in which correct formulae are written but the atoms are unequal on the two sides |
| Balanced chemical equation | An equation in which the number of atoms of each element is equal on both sides |
| Law of conservation of mass | Mass can neither be created nor destroyed in a chemical reaction; total mass of reactants equals total mass of products |
| Combination reaction | A reaction in which two or more reactants combine to form a single product |
| Decomposition reaction | A reaction in which a single reactant breaks down into two or more simpler products |
| Displacement reaction | A reaction in which a more reactive element displaces a less reactive element from its compound |
| Double displacement reaction | A reaction in which two compounds exchange their ions to form two new compounds |
| Neutralisation reaction | A reaction between an acid and a base that gives a salt and water |
| Exothermic reaction | A reaction in which heat is released along with the products |
| Endothermic reaction | A reaction in which energy is absorbed |
| Oxidation | Gain of oxygen or loss of hydrogen by a substance |
| Reduction | Loss of oxygen or gain of hydrogen by a substance |
| Redox reaction | A reaction in which oxidation and reduction take place simultaneously |
| Oxidising agent | A substance that supplies oxygen or removes hydrogen from another substance; it is itself reduced |
| Reducing agent | A substance that removes oxygen or supplies hydrogen to another substance; it is itself oxidised |
| Corrosion | The slow eating up of a metal by the action of air, moisture, or chemicals on its surface |
| Rancidity | The oxidation of fats and oils in food, producing an unpleasant smell and taste |
Formula and Reaction Sheet
Every equation here is from NCERT or a recent board paper. Write state symbols whenever the question says “balanced chemical equation”.
| Reaction | Balanced equation | Type | Observation or condition |
|---|---|---|---|
| Magnesium burning in air | 2Mg(s) + O2(g) → 2MgO(s) | Combination, exothermic, oxidation of Mg | Dazzling white flame, white ash |
| Quicklime with water | CaO(s) + H2O(l) → Ca(OH)2(aq) + heat | Combination, exothermic | Hissing, beaker becomes hot |
| Slaked lime with carbon dioxide | Ca(OH)2(aq) + CO2(g) → CaCO3(s) + H2O(l) | Combination | Whitewashed walls shine after 2 to 3 days |
| Heating ferrous sulphate | 2FeSO4(s) (heat) → Fe2O3(s) + SO2(g) + SO3(g) | Thermal decomposition, endothermic | Green to brown, smell of burning sulphur |
| Heating limestone | CaCO3(s) (heat) → CaO(s) + CO2(g) | Thermal decomposition, endothermic | Used in cement industry |
| Heating lead nitrate | 2Pb(NO3)2(s) (heat) → 2PbO(s) + 4NO2(g) + O2(g) | Thermal decomposition | Brown fumes of NO2, yellow PbO residue |
| Electrolysis of water | 2H2O(l) (electric current) → 2H2(g) + O2(g) | Electrolytic decomposition | H2 at cathode, O2 at anode, volume 2 : 1 |
| Silver chloride in sunlight | 2AgCl(s) (sunlight) → 2Ag(s) + Cl2(g) | Photolytic decomposition | White turns grey |
| Silver bromide in sunlight | 2AgBr(s) (sunlight) → 2Ag(s) + Br2(g) | Photolytic decomposition | Pale yellow turns grey; photography |
| Iron nail in copper sulphate | Fe(s) + CuSO4(aq) → FeSO4(aq) + Cu(s) | Displacement | Blue fades to green, brown deposit on nail |
| Zinc with dilute sulphuric acid | Zn(s) + H2SO4(aq) → ZnSO4(aq) + H2(g) | Displacement, exothermic | Bubbles of H2, flask becomes warm |
| Iron with steam | 3Fe(s) + 4H2O(g) → Fe3O4(s) + 4H2(g) | Displacement, redox | Needs steam, not liquid water |
| Thermite reaction | Fe2O3(s) + 2Al(s) → 2Fe(l) + Al2O3(s) + heat | Displacement, highly exothermic, redox | Molten iron; welding railway tracks |
| Sodium sulphate with barium chloride | Na2SO4(aq) + BaCl2(aq) → BaSO4(s) + 2NaCl(aq) | Double displacement, precipitation | White precipitate of BaSO4 |
| Lead nitrate with potassium iodide | Pb(NO3)2(aq) + 2KI(aq) → PbI2(s) + 2KNO3(aq) | Double displacement, precipitation | Yellow precipitate of PbI2 |
| Neutralisation | NaOH(aq) + HCl(aq) → NaCl(aq) + H2O(l) | Double displacement, neutralisation | Heat released |
| Copper oxide with hydrogen | CuO(s) + H2(g) (heat) → Cu(s) + H2O(g) | Redox; CuO reduced, H2 oxidised | Black turns brown |
| Zinc oxide with carbon | ZnO(s) + C(s) → Zn(s) + CO(g) | Redox; ZnO reduced, C oxidised | Carbon is the reducing agent |
| Manganese dioxide with hydrochloric acid | MnO2(s) + 4HCl(aq) → MnCl2(aq) + 2H2O(l) + Cl2(g) | Redox; MnO2 reduced, HCl oxidised | Greenish yellow Cl2 gas |
| Rusting of iron | 4Fe + 3O2 + xH2O → 2Fe2O3·xH2O | Oxidation, corrosion | Reddish brown flaky layer; needs air and moisture |
Solved Examples (NCERT-Based)
Example 1: Balance H2 + O2 → H2O
Step 1. Count. Left: H = 2, O = 2. Right: H = 2, O = 1. Oxygen is unbalanced.
Step 2. Put 2 before H2O. H2 + O2 → 2H2O. Now right: H = 4, O = 2. Hydrogen is unbalanced.
Step 3. Put 2 before H2. 2H2 + O2 → 2H2O. Left: H = 4, O = 2. Right: H = 4, O = 2.
Answer: 2H2(g) + O2(g) → 2H2O(l). It is a combination reaction and exothermic.
Example 2: Balance the NCERT exercise equations
(a) HNO3 + Ca(OH)2 → Ca(NO3)2 + H2O
Nitrate groups: 1 on the left, 2 on the right, so 2HNO3. Hydrogen is now 4 on the left (2 from HNO3, 2 from Ca(OH)2), so 2H2O.
Balanced: 2HNO3 + Ca(OH)2 → Ca(NO3)2 + 2H2O
(b) BaCl2 + H2SO4 → BaSO4 + HCl
Chlorine: 2 left, 1 right, so 2HCl. Hydrogen: 2 left, 2 right.
Balanced: BaCl2 + H2SO4 → BaSO4 + 2HCl
Example 3: Identify the reaction type
Zn + H2SO4 → ZnSO4 + H2
Zinc is a free element on the left. It takes the place of hydrogen in the compound and pushes hydrogen out as a free element. One element replacing another in a compound is a displacement reaction. Zinc is above hydrogen in the reactivity series, which is why it can do this.
Example 4: Identify oxidation and reduction
MnO2 + 4HCl → MnCl2 + 2H2O + Cl2
- MnO2 loses oxygen (it becomes MnCl2), so MnO2 is reduced.
- HCl loses hydrogen (it becomes Cl2), so HCl is oxidised.
- Oxidising agent: MnO2. Reducing agent: HCl.
Example 5: Find the coefficients (2023 board pattern)
x Pb(NO3)2 (heat) → 2PbO + y NO2 + O2. Find x and y.
Lead: 2 on the right, so x = 2. Nitrogen: 2 × 2 = 4 on the left, so y = 4. Oxygen check: left 2 × 6 = 12; right 2 + 8 + 2 = 12.
Answer: x = 2, y = 4.
Example 6: Why are the two reactions called opposites
Calcium oxide is formed by decomposition: CaCO3(s) (heat) → CaO(s) + CO2(g). One reactant gives two products.
Calcium hydroxide is formed by combination: CaO(s) + H2O(l) → Ca(OH)2(aq). Two reactants give one product.
Decomposition splits a compound into simpler substances and absorbs energy; combination joins substances into one product and usually releases energy. That is why NCERT calls decomposition the opposite of combination. This pair was a five-mark question in 2024.
Competency-Based Questions (with answers)
The 2026 paper puts chemistry in Section B with MCQs, one assertion-reason item, a 4-mark case-based question, and 3-mark and 5-mark answers. The questions below follow those formats. Attempt each before reading the answer.
Q1. Case-based: whitewashing a wall
A construction worker adds water to a bag of quicklime in a bucket. The mixture hisses, gets very hot, and forms a white paste. The paste is applied to a wall. Three days later the wall has a hard, shiny white finish.
- Write the balanced equation for the reaction in the bucket and name its type.
- Why does the bucket become hot?
- Explain, with an equation, why the wall becomes shiny after three days.
Answer. (1) CaO(s) + H2O(l) → Ca(OH)2(aq) + heat. It is a combination reaction. (2) The reaction is exothermic: heat is released as the calcium oxide and water combine. (3) Calcium hydroxide reacts slowly with carbon dioxide from the air to form calcium carbonate, which forms a thin shiny layer. Ca(OH)2(aq) + CO2(g) → CaCO3(s) + H2O(l).
Q2. Case-based: heating green crystals
A student heats a few green crystals in a dry boiling tube. Water droplets collect near the mouth of the tube, the crystals turn brown, and a gas with a sharp smell of burning sulphur escapes.
- Identify the green crystals and explain where the water droplets came from.
- Write the balanced equation for the decomposition.
- Name the type of reaction and state whether it is exothermic or endothermic.
Answer. (1) The crystals are hydrated ferrous sulphate, FeSO4·7H2O. On heating they lose their water of crystallisation, which condenses as droplets. (2) 2FeSO4(s) (heat) → Fe2O3(s) + SO2(g) + SO3(g). The brown solid is ferric oxide. (3) Thermal decomposition, endothermic, since heat has to be supplied continuously.
Q3. Case-based: electrolysis of water
A plastic mug has two carbon electrodes fitted at the bottom. It is filled with water, a few drops of dilute sulphuric acid are added, and two inverted test tubes are placed over the electrodes. A 6 V battery is connected. After some time, one test tube holds twice as much gas as the other.
- Why is dilute sulphuric acid added?
- Which gas collects at the cathode, and why is its volume double?
- A burning candle is brought near the mouth of each test tube. What happens in each case?
Answer. (1) Pure water is a very poor conductor of electricity. Dilute acid provides ions so that current can flow. (2) Hydrogen collects at the cathode. In 2H2O → 2H2 + O2, two molecules of hydrogen form for every one of oxygen, so the volume of hydrogen is twice that of oxygen. (3) Hydrogen burns with a pop sound. Oxygen makes the candle flame burn brighter.
Q4. Assertion-reason (2023 board)
Assertion (A): Reaction of quicklime with water is an exothermic reaction.
Reason (R): Quicklime reacts vigorously with water releasing a large amount of heat.
(A) Both A and R are true and R is the correct explanation of A. (B) Both A and R are true but R is not the correct explanation of A. (C) A is true but R is false. (D) A is false but R is true.
Answer: (A). Exothermic means heat is released. The reason states exactly that, so it explains the assertion.
Q5. Assertion-reason (2025 board)
Assertion (A): Decomposition reactions are generally endothermic reactions.
Reason (R): Decomposition of organic matter into compost is an exothermic process.
Answer: (B). Both statements are true. Decomposition needs energy in the form of heat, light, or electricity, so it is generally endothermic. Compost formation is a true exception that releases heat. The reason does not explain the assertion; it describes an exception to it.
Q6. Source-based: rusting experiment
Three test tubes are set up. Tube 1 has an iron nail in tap water, open to air. Tube 2 has an iron nail in boiled distilled water with a layer of oil on top. Tube 3 has an iron nail with anhydrous calcium chloride and a cork. After a week only the nail in tube 1 has rusted.
- What two conditions does the experiment show are necessary for rusting?
- Why is the water in tube 2 boiled and covered with oil?
- What is the role of anhydrous calcium chloride in tube 3?
Answer. (1) Both air (oxygen) and moisture are needed; tube 1 alone has both. (2) Boiling removes dissolved oxygen and the oil layer keeps air out, so the nail has water without oxygen. (3) Anhydrous calcium chloride absorbs moisture, so the nail has oxygen without water. Neither tube 2 nor tube 3 rusts.
Q7. Source-based: photography
Before digital cameras, photographic film was coated with silver bromide. When light fell on the film, the exposed parts turned dark. The film was then developed to fix the image.
- Write the equation for the change that takes place on the exposed parts.
- Name the type of reaction and the form of energy involved.
- Silver chloride shows a similar change. What colour change is observed?
Answer. (1) 2AgBr(s) (sunlight) → 2Ag(s) + Br2(g). The grey silver metal makes the exposed part dark. (2) Photolytic (photochemical) decomposition; light energy. (3) White silver chloride turns grey.
Q8. Case-based: iron nail in copper sulphate
Two test tubes contain equal volumes of blue copper sulphate solution. An iron nail tied to a thread is placed in tube A. Tube B is left as a control. After 20 minutes the nail is removed.
- Compare the colours of the solutions in A and B and explain.
- What is seen on the nail?
- Write the balanced equation and identify the more reactive metal.
Answer. (1) Tube A turns pale green because ferrous sulphate has formed; tube B stays blue. (2) A brownish deposit of copper coats the nail. (3) Fe(s) + CuSO4(aq) → FeSO4(aq) + Cu(s). Iron is more reactive than copper, so it displaces copper from its salt solution.
Important Questions for Board Exams
1-mark questions
1. What is a skeletal chemical equation?
An equation in which the formulae of reactants and products are correct but the numbers of atoms are unequal on the two sides.
2. What type of reaction takes place when silver chloride turns grey in sunlight?
Photolytic (photochemical) decomposition.
3. Which of the following is an endothermic process: formation of slaked lime, decomposition of vegetable matter into compost, dissolution of ammonium chloride in water, digestion of food? (2023)
Dissolution of ammonium chloride in water. The other three release heat.
2-mark questions
4. What is observed when aqueous solutions of potassium iodide and lead nitrate are mixed? Name the type of reaction and write the equation. (2023)
A yellow precipitate of lead iodide forms. It is a double displacement (precipitation) reaction. Pb(NO3)2(aq) + 2KI(aq) → PbI2(s) + 2KNO3(aq).
5. Why is a magnesium ribbon cleaned with sandpaper before burning?
Magnesium in air gets coated with a layer of magnesium oxide, which is unreactive and stops the metal from burning. Sandpaper removes the layer so that the pure metal can react with oxygen.
6. List the possible sources of energy required in decomposition reactions and illustrate one. (2025)
Heat, light, and electricity. Example with light: 2AgCl(s) (sunlight) → 2Ag(s) + Cl2(g).
7. Why does the colour of copper sulphate solution change when an iron nail is dipped in it?
Iron is more reactive than copper and displaces it, forming ferrous sulphate, which is green. The blue copper sulphate solution therefore turns pale green. Fe + CuSO4 → FeSO4 + Cu.
8. Why is respiration considered an exothermic reaction?
During respiration glucose combines with oxygen in the cells to form carbon dioxide and water, and energy is released. C6H12O6 + 6O2 → 6CO2 + 6H2O + energy.
3-mark questions
9. Define oxidation. Identify the oxidising agent and balance: (i) Pb3O4 + HCl → PbCl2 + Cl2 + H2O, (ii) MnO2 + Al → Mn + Al2O3. (2023)
Oxidation is the gain of oxygen or loss of hydrogen by a substance. (i) Pb3O4 + 8HCl → 3PbCl2 + Cl2 + 4H2O; oxidising agent is Pb3O4, since it oxidises HCl to Cl2. (ii) 3MnO2 + 4Al → 3Mn + 2Al2O3; oxidising agent is MnO2, since it gives oxygen to aluminium.
10. Define a double displacement reaction. Write an equation for one that is also (i) a neutralisation reaction and (ii) a precipitation reaction, with justification. (2023)
A reaction in which two compounds exchange ions to form two new compounds. (i) NaOH + HCl → NaCl + H2O: an acid and a base give salt and water, so it is neutralisation. (ii) Na2SO4 + BaCl2 → BaSO4 + 2NaCl: an insoluble product (BaSO4) forms, so it is precipitation. In both, ions are exchanged between the two reactants.
11. Why are decomposition reactions called the opposite of combination reactions? Give one equation of each, naming reactants and products. (2025)
In combination, two or more reactants join to form one product; in decomposition, one reactant splits into two or more products. Combination: CaO (calcium oxide) + H2O (water) → Ca(OH)2 (calcium hydroxide). Decomposition: CaCO3 (calcium carbonate) → CaO (calcium oxide) + CO2 (carbon dioxide).
5-mark questions
12. What is a chemical reaction? Describe one activity each to show a chemical change involving (i) change of colour and (ii) change in temperature. (2024)
A chemical reaction is a process in which reactants change into new substances with different properties. (i) Colour change: place an iron nail in blue copper sulphate solution for 20 minutes. The solution turns pale green and the nail gets a brown coating; Fe + CuSO4 → FeSO4 + Cu. (ii) Temperature change: add water to a small amount of quicklime in a beaker. The beaker becomes hot and the mixture hisses; CaO + H2O → Ca(OH)2 + heat. Both show that new substances have formed.
13. Define a decomposition reaction. Explain why (i) electrolysis of water and (ii) blackening of silver bromide in sunlight are decomposition reactions, naming the energy involved. Then justify that the reactions forming calcium oxide and calcium hydroxide are opposites. (2024)
A decomposition reaction is one in which a single compound breaks into two or more simpler substances. (i) 2H2O → 2H2 + O2: one compound gives two elements; electrical energy. (ii) 2AgBr → 2Ag + Br2: one compound gives two elements; light energy. CaCO3 → CaO + CO2 is decomposition (one reactant, two products, heat absorbed); CaO + H2O → Ca(OH)2 is combination (two reactants, one product, heat released). One splits and absorbs energy, the other joins and releases it, so they are opposites.
Common Mistakes and Examiner Tips
- Changing a subscript to balance. Students write H2O2 to fix oxygen. Fix: touch coefficients only. If a subscript changes, the substance changes and the step scores zero.
- Forgetting the coefficient on the small molecule. In 2Pb(NO3)2 → 2PbO + 4NO2 + O2, the 4 before NO2 is the one most often missed. Fix: after balancing, recount every element including oxygen from both products.
- Missing the condition above the arrow. Writing CaCO3 → CaO + CO2 without “heat” loses a mark when the question asks for a thermal decomposition. Fix: write heat, sunlight, or electric current above or beside the arrow every time.
- Calling the iron and copper sulphate reaction “double displacement”. Only one element is swapped. Fix: a free element on the reactant side means displacement; two compounds swapping ions means double displacement.
- Mixing up which substance is oxidised. In CuO + H2 → Cu + H2O, students say CuO is oxidised because it contains oxygen. Fix: ask what each substance did. CuO lost oxygen (reduced); H2 gained oxygen (oxidised).
- Naming the wrong agent. The oxidising agent is the one that gets reduced. Fix: the substance that gives away its oxygen is the oxidising agent; the substance that takes oxygen is the reducing agent.
- Saying all decomposition reactions are endothermic. Fix: write “generally endothermic”, and know the exception, decomposition of vegetable matter into compost, which is exothermic.
- Confusing volume ratio with mass ratio in electrolysis. Fix: volume of H2 : O2 is 2 : 1; mass ratio is 1 : 8. Hydrogen collects at the cathode.
- Writing the wrong colour of ferrous sulphate. Fix: the crystals are green (hydrated) and turn brown (ferric oxide) on heating, with a burning sulphur smell.
- Using “rusting” for every metal. Fix: rusting is only for iron. Silver tarnishes to black Ag2S; copper turns green. Use “corrosion” as the general word.
- Leaving out state symbols when the question asks for a balanced equation. Fix: always add (s), (l), (g), (aq). Remember that steam is H2O(g) and dilute acid is (aq).
- Answering the assertion-reason without checking whether R explains A. Fix: first mark each statement true or false, then ask whether R is the cause of A. Two true statements with no causal link is option (B).
Quick Revision Points
- Chemical reaction: new substances form. Observations: change of state, colour, temperature, gas evolved, precipitate.
- Word equation → skeletal equation → balanced equation. State symbols: (s), (l), (g), (aq). Conditions go above the arrow.
- Balancing follows the law of conservation of mass. Hit and trial: change coefficients only.
- Combination: A + B → AB. CaO + H2O → Ca(OH)2 + heat. Usually exothermic.
- Decomposition: AB → A + B. Heat (FeSO4, CaCO3, Pb(NO3)2), electricity (water), light (AgCl, AgBr). Usually endothermic.
- Electrolysis: H2 at cathode, O2 at anode, volume 2 : 1, mass 1 : 8.
- Displacement: A + BC → AC + B. Fe + CuSO4: blue to green, brown copper on nail. Thermite: Fe2O3 + 2Al → 2Fe + Al2O3.
- Double displacement: AB + CD → AD + CB. Precipitation (BaSO4 white, PbI2 yellow) and neutralisation (NaOH + HCl).
- Exothermic: burning, respiration, quicklime + water, compost. Endothermic: most decompositions, ammonium chloride dissolving.
- Oxidation: gain O or lose H. Reduction: lose O or gain H. Oxidising agent is reduced; reducing agent is oxidised.
- CuO + H2 → Cu + H2O: CuO reduced, H2 oxidised. Black CuO turns brown.
- Corrosion: iron rusts to Fe2O3·xH2O (needs air and moisture), silver blackens (Ag2S), copper turns green. Prevent by painting, oiling, galvanising, alloying.
- Rancidity: oxidation of fats and oils. Prevent with antioxidants, airtight containers, nitrogen flushing, refrigeration.
Weightage in Board Exams
Chemical Reactions and Equations is Chapter 1 of the CBSE Class 10 Science syllabus for 2026-27. It belongs to Unit I, Chemical Substances: Nature and Behaviour, which carries 25 marks of the 80-mark theory paper. That unit is shared with Acids, Bases and Salts, Metals and Non-metals, and Carbon and its Compounds, and from the 2026 paper onwards all chemistry questions sit together in Section B (25 marks). CBSE does not publish a fixed per-chapter figure, so the split below is drawn from the 2023, 2024, and 2025 papers.
| Question type | Marks | What was asked in recent papers |
|---|---|---|
| MCQ (usually the very first question) | 1 to 2 | Coefficients for Pb(NO3)2, Zn(NO3)2, or Al + H2O; reaction type of Zn + CH3COOH; mass ratio in electrolysis; which process is endothermic; products when Al and Mg burn |
| Assertion-reason | 1 | Quicklime exothermic (2023); decomposition generally endothermic versus compost (2025) |
| Very short answer | 2 | KI + Pb(NO3)2 observation and equation; sources of energy for decomposition; heating ferrous sulphate |
| Short answer | 3 | Oxidising agent and balancing; double displacement as neutralisation and precipitation; decomposition versus combination |
| Long answer or case-based | 4 to 5 | Activities showing colour and temperature change (2024); decomposition with energy types (2024) |
Expect 4 to 7 marks from this chapter in a typical year. Balancing and naming the reaction type are near-certain marks, and redox equations with oxidising agent identification are the most common 3-mark ask. Every NCERT activity has appeared as a question in the last three years, so learn the observation and the equation for each as a pair.
Class 10 Science · Chapter 1 – swipe through all 10 cards to understand the whole chapter.
Signs of a Chemical Reaction
New substances form, and one of five observations tells you it happened.
Physical changes (melting, dissolving) make no new substance.
- Change of state, colour, or temperature.
- Gas evolved (Zn + dilute H2SO4 gives H2 bubbles).
- Precipitate formed (Pb(NO3)2 + KI gives yellow PbI2).
Balancing an Equation
Atoms are neither created nor destroyed, so count them on both sides.
Change coefficients only; a changed subscript is a different substance.
- Law of conservation of mass is the reason.
- Start with the most unbalanced element in the biggest formula.
- Add (s), (l), (g), (aq) and the condition above the arrow.
Combination Reaction
Two or more reactants join to form a single product.
Most combination reactions are exothermic.
- Pattern A + B → AB.
- Quicklime + water hisses and becomes hot (whitewashing).
- 2Mg + O2 → 2MgO: dazzling white flame, white ash.
Decomposition Reaction
One compound breaks into simpler products when energy is supplied.
Generally endothermic; compost formation is the exothermic exception.
- Heat: FeSO4 green to brown, CaCO3 → CaO + CO2.
- Electricity: 2H2O → 2H2 + O2, H2 at cathode, volume 2 : 1.
- Light: 2AgCl → 2Ag + Cl2, white turns grey.
Displacement Reaction
A more reactive element pushes a less reactive one out of its compound.
Blue solution turns pale green; brown copper coats the nail.
- Pattern A + BC → AC + B, A above B in reactivity.
- Metal + acid (Zn + H2SO4) is displacement of hydrogen.
- Thermite: Fe2O3 + 2Al → 2Fe + Al2O3 + heat, welds rails.
Double Displacement
Two compounds swap ions to give two new compounds.
Precipitation and neutralisation are both double displacement.
- Pattern AB + CD → AD + CB.
- BaSO4 is a white precipitate; PbI2 is yellow.
- NaOH + HCl → NaCl + H2O is neutralisation.
Exothermic vs Endothermic
Exothermic reactions release heat; endothermic reactions absorb it.
Write the energy term when the question says exothermic.
- Exothermic: burning, respiration, quicklime + water, compost.
- Endothermic: most decompositions, NH4Cl dissolving (cold tube).
- Respiration: C6H12O6 + 6O2 → 6CO2 + 6H2O + energy.
Oxidation and Reduction
Oxidation gains oxygen or loses hydrogen; reduction is the reverse.
CuO is reduced (oxidising agent); H2 is oxidised (reducing agent).
- Both always happen together: redox.
- Oxidising agent gives oxygen and is itself reduced.
- MnO2 + 4HCl → MnCl2 + 2H2O + Cl2: HCl oxidised.
Corrosion
Air, moisture, or acids slowly eat away a metal surface.
Rusting is only for iron; corrosion is the general term.
- Silver turns black (Ag2S); copper turns green.
- Prevent: paint, oil, grease, galvanise with zinc.
- Alloying: stainless steel resists rust.
Rancidity
Fats and oils in food get oxidised and turn stale.
The change in smell and taste is the exam definition.
- Add antioxidants to foods with fats and oils.
- Store in airtight containers; refrigerate.
- Chip packets are flushed with unreactive nitrogen.
📝 Practice Chemical Reactions and Equations - 10 board questions
CBSE previous-year and competency-based · with answers & explanations
Start →Close ✕
Chapter Navigation
Previous: This is the first chapter
Next: Acids, Bases and Salts Class 10 Notes
Related Chapters in Class 10 Science
- Acids, Bases and Salts Class 10 Notes
- Metals and Non-metals Class 10 Notes
- Carbon and its Compounds Class 10 Notes
Practice What You Learned
Test yourself with our Class 10 Science Mock Papers to see how well you’ve mastered the concepts.
Explore More
Frequently Asked Questions
A balanced chemical equation has the same number of atoms of each element on both sides of the arrow. Equations must be balanced because of the law of conservation of mass: matter is neither created nor destroyed in a chemical reaction, so the total mass of the reactants equals the total mass of the products. Only coefficients may be changed, never the subscripts inside a formula.
Combination, in which two or more substances form a single product (CaO + H2O gives Ca(OH)2). Decomposition, in which one substance breaks into two or more (CaCO3 gives CaO + CO2). Displacement, in which a more reactive element displaces a less reactive one (Fe + CuSO4). Double displacement, in which two compounds exchange ions (Na2SO4 + BaCl2). Oxidation and reduction, in which oxygen or hydrogen is gained or lost.
Oxidation is the gain of oxygen or the loss of hydrogen by a substance. Reduction is the loss of oxygen or the gain of hydrogen. The two always happen together in a redox reaction, so the substance that is oxidised acts as the reducing agent and the one that is reduced acts as the oxidising agent. In CuO + H2 gives Cu + H2O, CuO is reduced and H2 is oxidised.
Iron is more reactive than copper, so it displaces copper from copper sulphate solution. The blue colour of copper sulphate fades to pale green as ferrous sulphate forms, and a reddish brown deposit of copper collects on the nail. This is a displacement reaction: Fe + CuSO4 gives FeSO4 + Cu.
A redox reaction is one in which oxidation and reduction occur at the same time. Respiration is an everyday example: glucose is oxidised to carbon dioxide and water while the oxygen we breathe in is reduced, releasing energy. Rusting of iron and the burning of fuels such as natural gas are also redox processes.
Corrosion is the slow damage of a metal by air, moisture or chemicals around it, as when iron rusts to reddish brown Fe2O3.xH2O or silver tarnishes black. Rancidity is the oxidation of fats and oils in food, which produces an unpleasant smell and taste. Rancidity is slowed by adding antioxidants, packing food in nitrogen, using airtight containers, or refrigeration.
An exothermic reaction releases heat along with its products, such as quicklime reacting with water, burning of natural gas, and respiration. An endothermic reaction absorbs energy, such as the thermal decomposition of calcium carbonate, electrolysis of water, or dissolving ammonium chloride in water, which makes the test tube cold. Most decompositions are endothermic; compost formation is the exception.
The chapter belongs to Unit I, Chemical Substances, which carries 25 marks shared among four chemistry chapters. In the 2023, 2024 and 2025 papers this chapter contributed about 4 to 7 marks: an MCQ on balancing coefficients, an assertion-reason item, a 2 or 3 mark question on reaction types or oxidising agents, and sometimes a 5 mark question on NCERT activities.